AAM Drive Shaft Transmission Slip Yoke
- Product Specs
- Description
- Diagrams
| Transmission Applications: |
|
Fits the GM transmissions with 32 spline output shaft: 6L50, 6L80E, TH-400 long tail, 4L80E long tail and Transfer Case: NP241C
|
| Series: |
1344 (3R) |
| U-Joint Lock Up (B): |
2.556 Inch |
| Bearing Cap Diameter (A): |
1.125 Inch |
| Vehicle Make: |
GM |
| Center Line to End of Spline (C): |
7.875 Inch (200.00 MM) |
| Barrel Diameter (D): |
1.886 Inch (47.90 MM) |
| Spline Outside Diameter (E): |
1.391 Inch (34.9 MM) |
| Number of Spline (F): |
32 (30 or 31 with blind spot - see note below*)
|
| Joint Angle: |
0.0 Degrees |
| Spline Type: |
Full Spline |
| Style: |
Inside Snap Ring |
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Transmission Output Shaft Style |
|
This is a fully splined slip yoke, if you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.
|
Driveshaft Slip Yoke 40032054
Related Part Number:
Neapco N3R-3-9101X Transmission Slip Yoke
PTI 3R03-400 Trans Slip Yoke
AAM 40012659 Trans Slip Yoke (Obsolete)
N3R-3-1642X, 40012495, GM 12479383, 88963576, 7838665, 40009290, 40026154
