Drive Shaft End Yoke / Pinion Yoke
The differential end yoke / pinion yoke transfers the power from the driveshaft to the pinion through a u-joint at the end of the driveshaft. This allows the driveshaft to spin while the rear differential travels up and down with the suspension.
| U-Joint Series: |
7290 |
| U-Joint Cap Diameter (A): |
1.125 Inch |
| Distance Between Machined Flats (B): |
2.625 Inch |
| Style: |
Inside Snap Ring |
End Yoke Length(C) :
- Center Line to End of Spline
|
3.180 Inch |
| Hub Diameter (D): |
1.875 Inch |
Spline Diameter (E):
- From Farthest Point to Farthest Point
|
1.263 Inch |
| Number of Splines (F): |
29 |
| Bore Length (G): |
1.500 Inch |
| Rear Axle Type: |
Chrysler 9.25 Inch (Front Axle)
|
How to Measure a Driveshaft Slip Yoke.
Application for the 9.25" (29 spline) 12 Bolt (Octagon Shaped Cover)
1 Ton Chrysler Van:
|
Rear |
1978 - 2003
|
|
1/2 Ton Chrysler Van:
|
Rear
|
1970 - 2004
|
|
1/2 Ton Dodge Pickup:
|
Rear
|
1974 - 2006
|
|
3/4 Ton Chrysler Van:
|
Rear
|
1974 - 2002
|
|
3/4 Ton Dodge Pickup:
|
Rear
|
1974 - 1999
|
|
Dakota:
|
Rear
|
1988 - 2005
|
|
Durango:
|
Rear
|
1998 - 2004
|
|
Fifth Avenue:
|
Rear
|
1973 - 1981
|
|
Imperial:
|
Rear
|
1974 - 1975
|
|
Monaco:
|
Rear
|
1975 - 1985
|
|
Polara:
|
Rear
|
1970 - 1974
|
|
Ram Charger:
|
Rear
|
1974 - 1993
|
Not Compatible with the DANA 60
Although the measurements are very similar the splines of a Dana 60 and Chrysler 9.25" are cut differently and do not interchange.
Count your bolts on the rear differential cover, the Chrysler 9.25" has a 12 bolt cover and is shaped like a stop sign (Octagon).
This part is compatible with:
Strap Kit: 1-0018
For assistance measuring your end yoke/pinion yoke you can use our:
End Yoke Measuring Guide
If you have any questions we are here to help:
CONTACT US | CHAT | (574) 287-9650
