Neapco Slip Yoke for GM vehicles with 1350 Series U Joints, 32 spline and matching measurement specs.
| Transmission Applications: |
|
Fits various manual and automatic transmission with 32 spline output shafts including 6L50, 6L80E and Long tail transmissions like the TH-400 and 4L80E. The Slip yoke also fits transfer cases including 241C, New Process NP205, NP208, NP241, NP243, NP246, NP261, NP263 and more.
|
| Series: |
1350 |
| U-Joint Lock Up (B): |
3.625 Inch |
| Bearing Cap Diameter (A): |
1.188 Inch |
| Vehicle Make: |
GM |
| Center Line to End of Spline (C): |
7.88 Inch |
| Center Line to Face Washer: |
1.31 Inch |
| Hub Diameter / Seal Diameter (D): |
1.89 Inch |
| Spline Outside Diameter (E): |
1.378 Inch |
| Number of Spline* (F): |
32 (31 with blind spot - see note below*)
|
| Spline Type: |
Full Spline |
| Style: |
Outside Snap Ring |
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Transmission Output Shaft Style |
|
This is a fully splined slip yoke, if you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.
|
| Transmission Output Shaft Style |
|
This is a fully splined slip yoke, if you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an O-ring you will need a counter boarded slip yoke.
|
|
|
Related Part Numbers:
Spicer 3-3-5551X Slip Yoke Counterbored
PTI 3503-32 Slip Yoke
AAM 40021420 Slip Yoke
