N3R-3-9762 is a Neapco built original equipment 3R yoke used most frequently on GM and Chevrolet Turbo 400 and Muncie 32 spline output shafts. N3R-3-9762X transmission yoke has an ideal barrel length for OEM replacement, restorations, or performance shafts. Longer yokes than N3R-3-9762X may fit as well but check your application to verify. Not a suitable barrel length for transfer cases.
| Transmission & Transfer Case Applications: |
|
Fits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E and confirm dimensions for transfer cases fitment.
|
| Series: |
3R |
| U-Joint Cap Diameter (A): |
1.125 Inch |
U-Joint Width (B):
|
2.556 Inch
|
|
Style:
|
Inside Snap Ring |
Slip Yoke Length (C):
(Center Line to End of Spline) |
5.34 Inch |
Barrel Diameter (D):
|
1.886 Inch
|
| Spline Diameter (E): |
1.391 Inch
|
Number Of Splines (F):
|
32 (31 with blind spot - see note below*)
|
| Joint Angle: |
15.0 Degrees |
| Spline Counter Bore: |
No
|
|
Vehicle Make:
|
GM |
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Transmission Output Shaft Style |
|
This is a fully splined slip yoke, if you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.
|
Slip Yoke
Neapco slip yokes are manufactured from alloy steel forgings and ductile casting for increased strength. Spline forms are manufactured through broaching operations that produce industry leading mating part fits. The tight tolerance of these spline fits coupled with reduced end play universal joints reduce time at the dynamic balancing operation and produce high-quality, vibration-free driveshafts.
AFTERMARKET REPLACEMENT DRIVELINE PRODUCTS FOR LIGHT VEHICLE, COMMERCIAL VEHICLE, AGRICULTURAL/OFF-HIGHWAY AND INDUSTRIAL APPLICATIONS
Named as one of the fastest growing private companies in the United States by Crain's Fast 50 and Inc. Magazine, Neapco, established in 1921, designs, manufactures and distributes OEM driveline products for automotive and non-automotive applications throughout the globe. Being vertically integrated, our innovative in-house design capabilities, state of the art US production facility and quality assurance makes Neapco a perfect choice for both your OEM and aftermarket needs.
