| Transmission & Transfer Case Applications: |
|
Fits various Chrysler, Dodge, and GM Vehicles with 26 spline output shafts including the: 904, A500, 42RH, 42RE, & AX15.
|
| U-Joint Series: |
7260 |
| Style: |
Inside Snap Ring |
| U-Joint Cap Diameter (A): |
1.078 Inch |
Distance Between Machined Flats (B):
|
2.125 Inch |
Slip Yoke Length (C):
(Center Line to End of Spline)
|
6.875 Inch |
| Barrel Diameter (D): |
1.559 Inch |
| Spline Diameter (E): |
1.156 Inch |
| Number of Spline (F): |
26 (25 with blind spot - see note below*)
|
| Spline Counter Bore: |
Yes
|
| Material: |
Steel |
| Vehicle Make: |
Dodge |
| OEM Number: |
2852323 (Detroit)
|
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Alternate Slip Yoke Options: |
|
Dana offers two 1310 yokes the 2-3-8731x and the 2-3-11731x. Both of these yokes are approximately .87" shorter than the 2603-26.
Dana also offers the 2-3-14311x which is 1330 series this yoke is slightly longer (.12") then the 2603-26.
|
Power Train Inc - Driveshaft Trans Slip Yoke
Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.
