Neapco Drive Shaft Transmission Slip Yoke
- Description
- Product Specs
- Vehicle
| Transmission & Transfer Case Applications: |
|
Fits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E and confirm dimensions for transfer cases fitment.
|
| Series: |
1350 |
|
Style:
|
Outside Snap Ring |
| U-Joint Cap Diameter (A): |
1.188 Inch |
U-Joint Width (B):
|
3.625 Inch |
Slip Yoke Length (C):
(Center Line to End of Spline) |
5.594 Inch |
| Through Hole: |
4.094 Inch |
Barrel Diameter (D):
|
1.885 Inch |
Spline Diameter (E):
|
1.378 Inch |
Number of Splines (F):
|
32
(31 with blind spot - see note below*)
|
|
Spline Counter Bore:
|
Yes
|
| Counter Bore Diameter: |
1.416 Inch |
| Counter Bore Depth: |
0.390 Inch
|
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Transmission Output Shaft Style |
|
If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.
|
Part Story
Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 1-0020. Although we do not include a washer and bolt, we understand that the bolt should be a 1/2" 20THD.
This part is an alternate option when used with Strap kit 1-0020, for N3-3-2431X Slip Yoke.
This part is compatible with:
Neapco 1-0020 Strap Kit
