Neapco Slip Yoke for GM vehicles with 1310 Series U Joints, 32 spline and matching measurement specs.
| Transmission Applications: |
|
Fits the GM transmissions with 32 spline output shaft: 6L50, 6L80E, TH-400 long tail, 4L80E long tail and Transfer Case: NP241C
|
| Series: |
1310 |
| Style: |
Outside Snap Ring |
| U-Joint Cap Diameter (A): |
1.063 Inch |
| U-Joint Width (B): |
3.219 Inch |
Slip Yoke Length (C):
(Center Line to End of Spline) |
7.5 Inch
|
| Barrel Diameter (D): |
1.886 Inch
|
| Spline Diameter (E): |
1.391 Inch
|
| Number of Spline (F): |
32 (31 with blind spot - see note below*)
|
| Joint Angle: |
15.0 Degrees
|
| Spline Counter Bore: |
Yes
|
| Counterbore Diameter: |
1.430 Inch |
| Counterbore Depth: |
2.000 Inch |
| Vehicle Make: |
GM
|
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
| Transmission Output Shaft Style |
|
If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring review the spline and counterbore measurements before ordering.
|
|
|
