PTI Drive Shaft Transmission Slip Yoke
THIS 1350 YOKE CAN BE USED TO PUT A CV ON THE 31 SPLINE TRANSFER CASE OUTPUT SOMETIMES FOUND IN FORDS.
IT HAS THE SAME SPLINE AND GROUND HUB DIMENSIONS AS THE SPICER 3-3-5431X WHICH IS FOUND ON FORD E4OD AND 4R100 TRANSMISSIONS.
- Description
- Product Specs
- Vehicle
| Transmission Applications: |
|
This 1350 yoke can be used to put a CV on the 31 Spline transfer case output sometimes found in Fords. It replaces the discontinued Dana parts number 3-3-4531X which was used in 4X4 Ford Expedition's. It has the same spline and ground hub dimensions as the Spicer 3-3-5431X which is found on Ford E4OD and 4R100 transmissions.
|
| Series: |
1350
|
Outside Yoke Dimension
U-Joint Lock Up (B):
|
3.625 Inch |
| Bearing Cap Diameter (A): |
1.188 Inch
|
| Vehicle Make: |
Ford |
| Center Line to End of Spline (C): |
7.312 Inch
|
Center Line to Washer:
|
1.00 Inch
|
| Hub Diameter (D): |
1.886 Inch
|
| Number of Spline* (F): |
30/31 |
| Spline Diameter (E): |
1.391 Inch |
| Spline Type: |
Full Spline |
| Style: |
CV Bolts 5-73-1228 |
| Material: |
Forged Chromoly |
VMRS: 024002038
* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
Powertrain Inc Transmission Slip Yoke
Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.
Compatible Parts:
Spicer 5-73-1228 CV Bolt
Alternate Parts:
Spicer 3-3-5431X Slip Yoke
USED IN 4X4 FORD EXPEDITION'S.
