PTI Drive Shaft Transmission Slip Yoke
Can be used on long tail-shaft housing transmissions but most commonly used as a transfer case yoke.
- Product Specs
- Description
- Diagrams
| Transmission & Transfer Case Applications: |
|
Fits the GM transmissions with 32 spline output shaft: 6L50, 6L80E, TH-400 long tail, 4L80E long tail and Transfer Case: Chevy NP241C, Dodge 242DLD, NV242DLD
|
| Series: |
1410 |
| Style: |
Outside Snap Ring |
| U-Joint Cap Diameter (A): |
1.188 Inch
|
| U-joint Width (B): |
4.188 Inch
|
Slip Yoke Length (C):
(Center Line to End of Spline)
|
8.070 Inch
|
| Barrel Diameter (D): |
1.886 Inch
|
| Spline Diameter (E): |
1.378 Inch
|
| Number Of Splines (F): |
32 (30 with two blind spots - see note below*)
|
Spline Counter Bore:
|
No
|
| Material: |
Steel / Plated |
| Vehicle Make: |
GM & Dodge |
VMRS: 024002038
| Transmission Output Shaft Style |
|
This is a fully splined slip yoke, if you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.
|
Powertrain Industries Driveshaft Transmission & Transfercase Slip Yoke
Related Part Numbers:
AAM
40021530 Trans Slip Yoke (1415 Series / Length 7.874 Inch)
Spicer
3-3-01646X Transmission Slip Yoke Nickle Plated
Spicer
3-3-6421X Transmission Slip Yoke
